{"id":1054,"date":"2016-01-30T15:42:06","date_gmt":"2016-01-30T15:42:06","guid":{"rendered":"http:\/\/www.sabulo.com\/sb\/?p=1054"},"modified":"2016-01-31T10:41:28","modified_gmt":"2016-01-31T10:41:28","slug":"short-demo-of-the-8mm-film-scanner","status":"publish","type":"post","link":"https:\/\/www.sabulo.com\/sb\/3d-printing-2\/short-demo-of-the-8mm-film-scanner\/","title":{"rendered":"Short demo of the 8mm film scanner output"},"content":{"rendered":"

I have finished the 8mm telecine robot, the construction of\u00a0which I have described in Part 1<\/a> and Part 2<\/a>. There will be a couple of more parts\u00a0at least so I can\u00a0provide a complete picture of how it works and how it was built here are\u00a0part 3<\/a> and part 4<\/a>. Part 5 will probably handle the code part for the Arduino robot.<\/p>\n

This short video shows you the final quality of the film I can capture automatically. I left the robot running for about 3\u00bd hours, and it captured 3,880 frames of 8mm film. I then inserted them into Blender’s video editor and set the output to be an AVI file, and rendered.<\/p>\n

I did not run the images through Photoshop to fix them in any way, all I did was add a transformation strip in Blender to slightly adjust brightness and contrast.<\/p>\n

I am actually quite chuffed about\u00a0the final result.<\/p>\n